1Boat Style

2 Select Dimensions

3Material & Color

Carver Boat Covers for V-Hull Center Console Fishing Boat with High Bow Rails with T-Top

Line art of the V-Hull Center Console Fishing Boat with High Bow Rails with T-Top boat style
Select Dimensions
Boat style: Center Console Boat with T-Top
Dimensions:How to Measure?

Materials and Colors


8 oz. Performance Poly-Guard
WhiteWhiteBeigeBeigeHaze GrayHaze Gray
7 oz. Sun-DURA
BlackBlackMist GrayMist GrayKhakiKhakiStorm GrayStorm Gray
MaroonMaroonRedRedYellowYellowGreenGreen
TealTealCobalt BlueCobalt BlueAdmiral NavyAdmiral Navy


Each Carver Cover Features:

  • Two Support Poles

    Included with your purchase are two support poles. These poles should be spaced equally into your rod holders. These poles are designed specifically to keep weight and pressure off of the antennas and other equipment.

  • VHF antennas, Collapsible Light Poles, and Antenna Slot

    If VHF antennas or collapsible light poles are mounted on your hard top or t-top, fold them down to the rear before applying your boat cover. As you put the cover on, roll the cover between the antennas. After you spread the cover over the support poles, locate and open the slot which will allow your antenna to exit.

  • Zippers

    Each cover has a dual zippered entry on both the port and starboard sides of the boat. During installation, make sure the zippers are closed (you’ll have a much easier time).

  • Bow Strap

    Attach the sewn in bow strap to the bow eye.

  • Rope Ratchet

    Each hard top or t-top boat cover comes with a rope ratchet. This ratchet is used for tightening the draw rope that is in the hem of the cover in order to make the cover secure.

  • Reinforcement/Repair Kit

    A reinforcement kit is included with every hard top or t-top boat cover purchase for added protection at sharp areas and stress points. Simply cut the material to size, peel the backing off, and stick it on the inside of the cover wherever you need extra reinforcement.

  • Heavy-Duty Tie Down Straps

    Tie down straps make storage easier, allowing you to secure your boat cover. Included are 12 black straps with quick release buckles.

  • Storage Bag

    When you aren’t using your cover, place it in the storage bag for safe keeping.

  • Additional Information

T-Top Boat with an Open Carver Boat CoverA T-Top Boat on a Trailer and Line Art

Part Numbers

Covers With Outboard Motor

*Select the part number for the dimensions and motor type that best fit your boat OR use the dropdown selection above. If you are having trouble finding what you need feel free to give us a call toll free at 1-866-626-8377 (1-866-6COVERS).

Part No.Centerline LengthBeam Width8 oz. Performance Poly-GuardIn Stock7 oz. Sun-DURAIn Stock
90018SD 18'6"102"$587.84$668.00  
90019SD 19'6"102"$602.87$685.08  
90020SD 20'6"102"$618.30$702.62
90021SD 21'6"102"$633.56$719.96
90022SD 22'6"102"$648.81$737.29
90023SD 23'6"102"$664.03$754.57
90024SD 24'6"102"$679.28$771.90
90025SD 25'6"108"$694.51$830.76
90026SD 26'6"108"$709.75$806.54
90027SD 27'6"108"$753.30$856.01
90028SD 28'6"120"$796.84$905.51
90029SD 29'6"120"$835.36   $949.28  
90030SD 30'6"120"$873.88   $993.04  
90031SD 31'6"120"$912.40   $1,036.83
90032SD 32'6"120"$950.92   $1,080.60  
90033SD 33'6"120"$989.44   $1,124.36
90034SD 34'6"120"$1,027.96   $1,168.14  

Measuring Instructions

To choose your size, simply measure your boats overall length from tip of bow to back of transom in a straight line with no contours. These covers are made to accommodate for a single outboard mounted on the transom. If you have dual outboards, please order the next size up. If your outboard is mounted on a bracket, please include the bracket in your overall length measurement

What makes our material better?

Both Sun-DURA and Poly-Guard materials are made in the USA by highly respected mills- Glen Raven and Shuford. These materials are true loom-woven marine grade polyesters which are designed to withstand harsh elements, such as intense sun and heavy rain. The weave on these fabrics is very tight which makes for high tear resistance. Either material will perform well in any area; whether you live in the extreme desert, or are using this cover for storage in a tropical climate. They are even good for areas like Alaska and Canada where you get extremely cold temperatures and snow. Both materials are breathable meaning you don't have to be concerned with mold or mildew developing while your boat is under cover.

The difference between these materials is that Sun-DURA comes in more color options, and it is slightly better for fade resistance. The material is warrantied for 2 years longer than the Poly-Guard. However, both of these are top quality materials which will perform in any environment. Either would be an excellent choice to protect your boat.

We are proud to offer these materials and stand above our competition. Carver Industries makes these covers in Landrum, SC.