Covering your boat with a Hard Top or T Top does not have to be tough! All you have to decide is whether you want a cover to go up and over the T Top or one that attaches under the T Top and begin shopping! Our covers work great for both Walk Around Cuddy's with Hard Tops or Center Console Fishing Boats with T Tops, such as Sea Hunt, Scout, Key West, Sea Fox, Grady White, and more.
Carver Industries designed their cover to go over the Hard Top and even provide coverage for your transom mounted outboard motor (pictured). This cover is sure to keep any debris out on a windy day and make protection easy with one simple installation.
Not only do our Carver covers come with all the accessories you could possibly need, but they are made to go up and over your top, covering and protecting your entire boat and all of its equipment, including the outboard motor. This cover solves the problem of covering a boat with VHF antennas and other roof mounted T Top equipment with a hook and loop (like Velcro) slot at the rear of the T Top, which is made to allow your antennas to exit. It also includes ample room in this area to accommodate for the added height of radar domes and other items. The cover comes with 2 support poles which are topped with end caps. These are made to sit inside of your rocket launchers or rod holders, so the cover is not applying pressure directly to your equipment.
Carver's Hard Top/ T Top boat cover features zippered access on both the port and starboard side. This will allow you to access your boat while it is covered. The cover will have a draw rope sewn into its hem, which will exit at the zippered areas. A rope ratchet is included with the cover to aid in pulling that draw rope tight. In addition to the draw rope, the cover also has loops sewn into its hem every 2-3'. Simply use the included tie down straps to secure your cover to the trailer. Lastly, this cover also comes with a reinforcement kit. The reinforcement kit is self-adhesive, and once you cut it to size, you just peel the backing off and adhere it to the inside of the cover. This will create a padding on the inside of the cover wherever you may have sharp edges or expect extra wear. These covers are Made in the USA by Carver Industries. They are warrantied for 5-7 years, depending on material. Covers for these styles are intended for storage only.