Skip Navigation

Wakeboard / Ski Boats Style Boat Covers

Measuring Your Boat and Knowing Your Motor Type

Boat measurement and motor type identification diagram.

Westland Select Fit Boat Covers are applied by the general hull style and basic dimensions of the boat being covered. These covers are listed in 1’ increments on the half-foot, so the cover may fit a little tighter or looser, depending on the centerline length and beam width of your boat, in comparison to the listed dimensions for the cover. Each cover has a draw rope sewn into the hem of the cover for purposes of pulling the cover tight and tie down loops sewn throughout for tying the cover down.

These covers are available in 4 material options: Sunbrella with a 10 year warranty, Sharkskin Supreme SD with a 7 year warranty, Sharkskin Plus with a 5 year warranty. All of Westland’s covers are reinforced at high stress areas and have two sewn in vent caps to increase breathability.

To ensure you choose the correct cover: First, select the style that most resembles your boat. Of course, check the console dimensions, rail allowance, and trolling motor (or any other added feature) accommodations as well. Next, to obtain the centerline length of the boat, simply run a measuring tape down the side or center of your boat from the furthest point of the bow (be sure you do not contour to any curves or go up and over anything like a windshield or console) to the back of the transom. Lastly, the beam is a measurement taken from gunnel to gunnel at the widest point, also in a straight line without contour.

Select Your Sub-Style, Motor Configuration and Dimensions

conventional-tournament-ski-boat Illustration

Conventional Tournament Ski Boat Covers

Designed for closed bow conventional tournament style ski boats with non-integrated swim platforms, squared windshields and a pointed bow. Does not accommodate wakeboard towers. Fits boats with I/O stern drive or direct drive.

1
2
conventional-tournament-ski-boat-with-tower Illustration

Conventional Tournament Ski Boat With Tower Covers

Designed for open bow conventional tournament style ski boats with squared windshield, pointed bow, non-integrated swim platforms and mid ship deck mounted wakeboard towers. Uses 48" cutouts with hook and loop fasteners to seal around tower legs and still keep out water. Fits boats with I/O stern drive or direct drive.

1
2
tournament-ski-boat-with-sport-arch Illustration

Tournament Ski Boat With Sport Arch Covers

Desigined for conventional style ski boats with mid ship top mount arch style sports tower. Uses single 52" cutout per side with hook loop fastners to seal around tower legs. Fits i/o stern drive and direct drive boats.

1
2
euro-tournament-ski-boat Illustration

Euro Tournament Ski Boat Covers

Euro style tournament or competition ski boats featuring molded or integrated swim platforms. Overall centerline length includes swim platform. Does not accommodate a wakeboard tower.

1
2
euro-tournament-ski-boat-with-wakeboard-tower Illustration

Euro Tournament Ski Boat With Wakeboard Tower Covers

Designed for euro style tournament or competition ski boats featuring molded or integrated swim platforms and a mid-ship deck mounted wakeboard tower. Uses 48" cutouts with hook and loop fasteners to seal around tower legs and still keep out water. Overall centerline length includes swim platform.

1
2
low-profile-ski-boat Illustration

Low Profile Ski Boat Covers

For low profile ski/sport boats. Accommodate boats with or without windshields or windscreens and with or without bow rails. I/O version fits boats with I/O stern drives, jets, or bracket mounted outboards. Inboard and outboard version.

1
2
euro-v-hull-runabouts Illustration

Euro V-Hull Runabouts Covers

Fits open and closed bow style runabouts and low profile cuddy style boats with euro style integrated swim platforms and curved glass windshields. Overall centerline length listed includes swim platform. Accommodates bow rails up to 3" in height. Inboard and outboard versions.

1
2
fish-n-ski-fishing-v-hulls-with-bow-troll-motor Illustration

Fish 'N Ski (Fishing V-Hulls With Bow Troll Motor) Covers

Fits open and closed bow Fish N' Ski style runabout and low profile cuddy style boats with bow mounted trolling motor. Inboard and outoard versions.

1
2
v-hull-sport-arch Illustration

V-Hull Sport Arch Covers

Fits open and closed bow style runabouts and low profile cuddy style boats. Accommodates bow rails up to 10" in heights and squared glass windshields with Sport Arch tower. Uses one 48" cutout with hook and loop fastener to seal around tower legs in each side.

1
2